Maggots are larvae of the BSF fly type which have potential as raw material for chitosan because they contain chitin. The production of chitin into chitosan goes through the deacetylation stage using a strong base with a high concentration, causing the neutralization process to take a long time and require a lot of distilled water. For time and cost efficiency, acid is used in the neutralization process. The aim of the research was to determine the effect of the type and concentration of acid on the degree of chitosan deacetylation. Chitosan is made through deproteination, demineralization, depigmentation and deacetylation stages. The deacetylation stage is neutralized with two types of acid, namely acetic acid and hydrochloric acid with a concentration of 1.5%; 3% ; and 6%. The results was observed 3.175 to 6.558 %, 3.204 to 5.833 %, 2.714 to 4.617 %, 11.50 to 15.33% and 53.04 to 71.22% for water content, ash content, total nitrogen level, yield and deacetylation degree, respectively. The best treatment was combination of 6% hydrochloric acid with a water content of 3.17%, ash content of 3.20%, total nitrogen content of 2.71%, and degree of deacetylation of 71.22%. The procedure for making chitosan in previous research was without heating or soaking using room temperature and using neutralization using distilled water so it took
### Buku ini berfokus pada metode ekstraksi chitosan dari sisa maggot (exuviae) yang dihasilkan dari peternakan Black Soldier Fly (BSF). Maggot merupakan larva dari ulat pemakan mayat jenis Black Soldier Fly, yang asalnya berasal dari Amerika dan mulai menyebar di daerah tropis dan sub-tropis. Pengembangan metode ini bertujuan untuk mengubah sisa maggot ini menjadi produk bernilai tambah, sekaligus memanfaatkan limbah yang sebelumnya belum terpakai secara maksimal. Proses ekstraksi chitosan melibatkan tahap deacetylatasi, di mana grup acetamida dalam chitin diganti menjadi amine. Kualitas chitosan yang diperoleh sangat tergantung pada efektivitas tahap deacetylatasi dan sumber chitin yang digunakan. Penulis menjelaskan bahwa deacetylatasi adalah tahap kritis dalam pengolahan chitosan, serta memberikan detail tentang faktor-faktor yang mempengaruhi proses tersebut, seperti koncentrasinya, waktu, dan suhu yang digunakan. Buku ini cocok bagi para ahli dan pembaca yang berminat pada pengolahan limbah maggot menjadi produk bernilai tambah, serta para peneliti yang ingin memahami proses ekstraksi chitosan dengan detail.
Unduh untuk perangkat lain: